Building a Triumph engine and getting a Bonnie runnin'

The engine was hurt! needed cams, lifters, valve guides and valves, pistons, all bearings and seals. Good to go now! The Bonnie had worn handlebar bushes, 1 dead coil, Speedo wasn't working. timpanium diode was wired wrong, got it running and it's leakin' oil from the rocker boxes - Aaaaah !

The rain is ended -

But now it's chilly! but a slow warm up is comming! Yippee ! Finishing up a Triumph rebuild today. It's been a struggle. Sometimes they just fight every inch of the way. Others seem to fall together!! Ha ha

Boring!

BSA jugs! Then I can rebuild an engine.

Now rain and 38 degrees!

Dang, 2nd day of spring (somewhere!) Triumph is almost done. Ordering pistons,rings and bearings tomorrow for the "Beeze" motor.

Buildin a unit Bonneville engine

For a friend. Almost done! Then an A65 engine.

The weather's creapin' into the mid 60's!! Ridin' weather!! AT LAST!!!

Gotta weld some kickstand mounts today. Then weld "K" model oil bag mounts onto my "TriBSA" Wanna "Git 'er done"

Gettin close to ridin' weather!!!

Replaced some Triumph handlebar bushings. Need to look at one of the carbs. Got to start my Beeze and get it going! Need to build a unit BSA engine for a guy (hasn't run for YEARS !) Finishing up a '54 Triumph for a fella. Want to get my C15 goin' too.